123.hp.com/setup 7610 printer

123 HP OfficeJet 7610 Printer

HP OfficeJet 7610 is an All-in-One Multifunctional printer device. Also,it supports automatic duplexing, ePrint and AirPrint. Automatic Duplex feeder enables the user to scan and fax the multipage documents. It has a simple control panel with 2.2 inch Monochrome LCD display and 2 buttons for Home and Back control. Additionally ,it has inbuilt quiet-mode feature and automatic paper sensor. Along with the Input Tray that hold 100 sheets. With HP Print Service App you can simplify the printing process, it does not need a separate printing app. From the native app, choose the document or image that you want to print. After clicking print, the device lists the printer devices within the range. 123.hp.com/oj7610 has built-in software for printing, scanning and faxing process. It offers high-quality printing results, but it takes more time for graphics. To get more information, visit 123.hp.com/setup 7610.




Unbox HP OfficeJet 7610-123.hp.com/setup 7610

  • To Begin with, Open the printer package. On the top ,you can find set of reference materials and basic setup accessories needed
  • Set aside the packing materials, visit 123.hp.com/setup 7610 and reuse the wrapping materials
  • Next, use the plastic cover and pull out the printer device from the package. Remove the Styrofoam end caps and peel off the tape materials
  • Slide out the input tray,remove the tape and other packing materials. Use the paper width guide to align the paper.
  • Following the paper alignment, open the top cover and remove the packing materials. Finally, use the basic accessories to set your printer device.

HP OfficeJet 7610 Setup-123.hp.com/setup 7610

  • To start, Connect one end of the power cord to the printer device and the other end to the power source
  • For steady power flow, HP recommends you to use the wall outlet. Turn ON your  printer device using the power button.
  • On the initialization process, you can set time zone, language and preferred language. After setting the basic preferences, tap OK to confirm the
  • At that point, the 123.hp.com/oj7610 device asks you to install the ink cartridge. Open the ink access door and install the cartridges in the allotted slots.
  • During the unpacking process, don’t touch ink nozzles or electrical contacts. After that, the device displays ” Thank you for installing genuine ink cartridges”.
  • Slide out the input tray and load a stack of unused A4 sheets. Your printer device prints out an alignment page.
  • Scan this aligned page to calibrate the printer device. After that, the panel either displays ” Alignment successful” or ” Alignment Failed” message.
  • If the process is not successful, get more support from the 123.hp.com/setup 7610 manufacturer.

Printer Driver Installation Using CD-123.hp.com/setup 7610

  • First, insert the software installation CD that came with the package on the CD drive.
  • At the very moment, The Printer device detects and run the setup.exe. To continue, Click yes in the user Account Control window.
  • You can use the ” Go Online ” option and continue the process with 123.hp.com/setup 7610 support. Here we are using the CD so click “No thanks,I am using the CD”.
  • The installation process takes 3 steps prepare ,connect and then finally activate. First, the Prepare step involves a basic printer driver setup process.
  • After that, connect process lists you needed software. Use the Customize Software Selection process button and to install.
  • Following that, choose ” I have reviewed the Installation agreements and Settings” check box.
  • In the meantime, The Installer alerts you to pick the connection type. There are USB, wireless or connect later option.
  • In the End, Mention your printer’s postal code and primary usage in the fax setup wizard. This software installation process does not need an active internet connection.

Printer Driver Installation-Mac

  • To start with , open your Mac device and select system preferences under the apple menu. First, choose Printer and Scanners in the system preferences window.
  • Second, Choose your 123.hp.com/oj7610 printer device from the printer’s list. Likewise, you can use the (+) sign to attach a new device.
  • On the Add window, operators can choose the printer device and the printer’s use.
  • Finally,click add and attach the printer device to the list.

Wireless network connection-123.hp.com/setup 7610

  • In the Beginning, Tap the Wireless icon on the panel and select settings (gear-like) icon. Following that, the wireless setup wizard displays the list of available networks.
  • First, Choose your network name from the list, tap OK and enter your network password. After entering the network password, touch Done.
  • Second, validates the credentials and connect with the wireless network.
  • In the End, Printer device displays ” connection successful” message. It indicates that you have connected your device to a wireless network.

WiFi Protected Setup-123.hp.com/setup 7610

WiFi Protected Setup assists you to establish a stable and rapid wireless connection between the router and the wireless enabled device. Though, the wireless connection process takes more time WPS allows to connect without entering the wireless credentials.

Push Button

  • To start with, press the WPS button on the router and select the preferred network in your device. After that, your printer setup the wireless connection with your 123.hp.com/oj7610 device.
  • Use the wireless device with the WPS button to setup the connection. First, press the wireless button on your router and then on your Device.
  • After a while, WPS transmits the wireless connection information to the device. Additionally, the device store this information for future connection process

PIN method

  • Use the WPS PIN and establish the wireless connection. In other words, an automated and reliable WPS PIN setup the Wireless connection.
  • First, locate the WPS PIN in the WPS configuration page. Enter it in the router’s wireless configuration panel.
  • So, you can set up the wireless connection with the non-WPS button device with the WPS PIN.

Troubleshooting Instructions-123.hp.com/oj7610

Power Connection-123.hp.com/setup 7610

Power Button plays an important role to start and process the 123.hp.com/oj7610 device. If there is a defective button or the device fails to start, use the following instructions.

Check with the power cord connection

  • To Start with, connect the power cord to other devices it helps to detect the working condition of the cord.
  • After that, check the working condition of the connected devices. It helps you to determine the error.
  • If the issue lies with the power button, continue the process and resolve the issue. For more support, visit 123.hp.com/setup 7610.

Defect in the Power Button

  • To start with, make sure that the power button clicks when you press it. If the button fails to react to the applied pressure then the button might be stuck.
  • Get support from the 123.hp.com/setup 7610 and clean the button. Following the process, if the issue is not resolved ,  replace the power button.

Prints Blank Pages

If your device prints a Blank page, check with the ink cartridges and try to fix the issue.

Empty Ink Cartridges

  • To examine the ink level, press the ink icon to get the estimated ink level detail. With the estimate ink level chart, you can easily find the cartridge that has low-ink level.

Ink Cartridge Brand

  • Secondly, check with the cartridge’s brand. It is recommended to use the HP’s ink cartridges to achieve better quality.
  • Replace the non-HP ink cartridges with the original brand and try to print.

Jammed Ink cartridges

  • Finally,check for the clog or jam inside the ink cartridge outlet. Check for dry ink and clog at least once in a week.
  • Don’t make the printer device idle.If there is no request to process, turn it OFF because the ink cartridges might get dried out.

Print Job got Stuck-123.hp.com/setup 7610

Use the following instructions to solve if the printer device fails to continue the printing process.

Paper Jam

  • To start with,check your device’s message list. The device might display the error message if there is a paper jam or torn pieces in the input tray.
  • First, turn OFF your printer device and unplug the power cord from the printer device.
  • Second, open the ink access door and check for clogged paper and torn pieces inside the ink cartridges.
  • After that, use your hands and pull out the jammed paper. After a while, use the torch device and check for torn pieces.

Power Connection

  • Lastly, check with the power connection the improper power cord connection might result in the paper.
  • Try to insert the power cord properly and get a seamless power connection.

Insensitive Touch Screen

If the panel fails to respond to your request, check with the screen’s condition and fix the issue.

Cracked Touch Screen

  • To begin with, check with the printer’s screen. If the screen is broken or cracked it may fail to process or respond to your request.
  • Get support from 123.hp.com/setup 7610 to replace the 123.hp.com/oj7610 printer’s touchscreen.

Motionless Screen

  • If the screen fails to respond to your request , then restart the printer device.
  • First, Unplug the power cord from the printer device and let it idle for 20 seconds.
  • After a while, reconnect the power cord to the printer device and check whether it turns ON automatically.
  • Finally, if the issue is not resolved get support from 123.hp.com/setup 7610.


This site provides assistance to solve the printer related issues. Get guidance for the printer setup and the driver installation. You can get a clear idea about the printer’s process with the provided images and information. We don’t own any information, content and images are owned by the 123.hp.com/setup 7610.