HP OfficeJet Pro 6954 All-in-One Printer Wireless network setup

 

Before begining the of HP OfficeJet Pro 6954 All-in-One Printer Wireless network setup process for your HP OfficeJet Pro 6954 All-in-One Printer you have to make sure that the printer is connected to a wireless network and the network you have connected the printer is working properly. Both the printer and computer should be on the same network. If you are prompted to enter the wireless network and a wireless password, manually type it.Then follow the below given steps to setup the printer on your wireless network. 

  1. From the control panel, click the Wireless Setup Wizard to proceed the wireless communication.
  2. By swiping down the tab open the Dashboard from the control panel and click
  3. Click Settings Wireless Settings Wireless Setup Wizard or Wi-Fi Protected Setup.
  4. Finish the HP OfficeJet Pro 6954 All-in-One Printer Wireless network setup process by the instructions that appear on the screen.

 

To change the connection type, follow the below given instruction if you have any other type of connection. After installing the HP printer software, connect your printer by doing any one  of the folowing  

  • Remove the ethernet cable from printer and you have to run the Wireless Setup Wizard for wireless connection. You will be connected from an ethernet connection to a wireless connection.
  • Click Tools Device Setup&Software Convert a USB connected printer to wireless and follow the instructions that appear on the screen for HP OfficeJet Pro 6954 All-in-One Printer Wireless network setup.
  • Visit 123.hp.com after connecting to your wireless network in OS X. This will help you to change the USB or Ethernet connection to wireless.
  • In windows : if you want to change the wireless connection to USB or Ethernet connection, the printer should be connected using the USB or Ethernet cable
  • In OS X : Touch System Preferences and click Printers&Scanners. In the left pane select the printer at the bottom list. Connect your USB or Ethernet cable to the connector. Click + below the printers list at left. The new printer should be selected by you and the printers model name from the Use pop-up menu and click Add

HP OfficeJet Pro 6954 All-in-One Printer Testing the wireles network connection

To know about the printer status, hardware address i.e., MAC address and IP address print the wireless test report .  If a wireless connection failed, the test report gives the diagnostic information. The network settings will be displayed by the printer, if the printer is connected to the network and the HP OfficeJet Pro 6954 All-in-One Printer Wireless network setup process is successful. 

For the wireless test report, click the Wireless Setup Wizard to proceed the wireless communication, in the control panel.By swiping down the tab open the Dashboard from the control panel and click Wireless Print Reports Wireless Test Report.

123-hp-ojp6954-Wireless-network-connection
123-hp-printer-driver-install